Loading ...
Loading ...
Loading ...
P/N
INSTALLATION INSTRUCTIONS
GRAVITY DAMPER AND COLLAR WITH
BIRD SCREEN
PART # LOHC
INSTALLER:
Please leave these Installation Instructions with unit for the owner.
Do not force shutter into opening!, Do not open shutter by lifting individual blades!.
Do not install shutter leaning forward or backward!
1. Shutter frame should be mounted level and squarely on outside wall. Care should be taken not to
twist the shutter frame. Never cover shutter with siding or masonry work. Shutter should be
mounted so it can be removed any time in case of damage.
2. Shutter should operate as freely after installation as it did before.
3. CAUTION: Shutter flaps must open in the direction of airflow.
4. Caulking compound is recommended between shutter frame edges and the wall.
If Siding is present it should be made to overlap Damper Flashing on top & sides.
5. Clean and lubricate shutter at the same time that the fan is clean.
6. Tape the joint with a high-grade duct tape or metal (preferred) tape.
7. Check installation for proper fan operation – shutter flaps must Open with fan ON and Close with
fan OFF.
INSIDE OF
WALL
COLLAR
WITH BIRD
SCREEN
OUTSIDE
OF WALL
SHUTTER
MOUNTING
SCREWS
(NOT INCLUDED)
DO NOT TIGHTEN
MOUNTING SCREWS
TOO TIGHT
DIRECTION OF
AIR FLOW
FITS INSIDE BIRD SCREEN
METAL DUCT 10" ROUND
Lynx Professional Grills
6023 E. Bandini Blvd.
Commerce, CA 90040
Service: (888) Buy-Lynx
(888)-289-5969
www.lynxgrills.comwww.lynxgrills.com Fax: (323) 838-1778
Loading ...