Loading ...
Loading ...
Loading ...
Installation Instructions
REMOVING THE FREEZER DRAWERS (cont.)
REMOVE THE BASKET
Open the bottom freezer drawer until it stops.
Pull the divider forward until the rear locating tabs
are out of the slots. Turn the divider slightly to the
side to release the front locating tabs and lift out.
The freezer basket rests on the metal slide brackets
and is held in place with swing locks.
Turn the swing locks from horizontal to vertical
position.
Lift the front of the basket up, rotate it toward you,
and bring it straight up to remove.
Lift the back portion of the basket up and out
of the drawer.
1
A
D
E
The freezer drawers can be removed, if needed, to
fit through tight areas.
Read these instructions completely and carefully.
REMOVE THE DRAWER FRONT FROM
THE SLIDES
Remove the hex-head screw from each side
of the rail assembly.
Tilt the drawer front toward the refrigerator
and lift out.
Set the drawer front on a non-scratching
surface.
Push the rail assemblies back into the cabinet.
2
A
B
C
B
24
BOTTOM DRAWER
Rail
assembly
D
A
Screw
REMOVE THE BASE GRILLE
(if needed)
If, after removing the freezer drawer and
refrigerator door, the refrigerator will still not fit
through a doorway, the base grille can be
removed.
Remove the 2 Phillips-head screws on either
side of the base grille.
Pull the grille straight out.
3
A
B
C
F
Loading ...
Loading ...
Loading ...