Loading ...
Loading ...
Loading ...
Installation Instructions
REMOVE THE FRESH FOOD
DOOR HANDLE
(For placement in the installation location or
reversal of the handles – on some models)
Stainless steel (on some models):
REMOVING THE DOOR
HANDLE: Loosen the
set screws with the
3/32 Allen wrench
and remove the
handle. NOTE: For
Double Door models,
follow the same
procedure on the
opposite door.
Plastic handle (on
some models):
REMOVING THE DOOR HANDLE: Depress the tab on
the underside of the handle and slide the handle up
and off of the mounting fasteners.
REVERSING THE
DOOR HANDLE
(on some models):
• Remove the
handle mounting
fasteners with a
1/4 Allen
wrench and
transfer the
handle mounting
fasteners to the
right side.
• Remove the logo
badge.
• Remove and
transfer the plug button to the left
side of the fresh food door. NOTE: Use a flat plastic
edge to prevent damaging the door. Remove any
adhesive on the door with a mild detergent. Remove
the paper covering on the adhesive backing on the
logo badge prior to carefully attaching the badge to
the door.
A
A
6
A
B
A
B
Mounting
Fasteners
Mounting
Fasteners
Badge
Badge
(appearance may vary)
(appearance may vary)
REMOVE THE TOP AND BOTTOM
FREEZER DRAWER HANDLES
Stainless steel and plastic handles:
Loosen the set screws located on the underside of
the handle with the 1/8 Allen wrench and remove
the handle.
NOTE: If the handle mounting fasteners need to be
tightened or removed, use a 1/4 Allen wrench.
A
7
A
20
INSTALLING THE REFRIGERATOR (cont.)
A
Loading ...
Loading ...
Loading ...