Loading ...
Loading ...
Loading ...
6 SAFETY INSTRUCTIONS
CAUTION
Installation
If the refrigerant gas leaks during the installation,
ventilate the area immediately.
• Such leakage it can be harmful for your health.
Always check for gas (refrigerant) leakage after
installation or repair of product.
• Low refrigerant levels may cause product failure.
Keep the product level, even when installing it.
• This will help to avoid vibration or water leakage.
Use two or more people to lift and transport the
product.
• This will help to avoid personal injury.
Installation work must be performed in accordance
with the National Electric Code by qualified and
authorized personnel only.
Do not place objects in direct proximity of the
outside unit. Do not let leaves and other debris
accumulate around the unit. Leaves are a hotbed
for small animals, which can enter the unit. Once
inside the unit, these animals can lead to the unit
malfunctioning, and end up causing in smoke or fire
when they make contact with electrical parts.
• There is a risk of fire or electric shock.
Do not install the product where it will be exposed to
sea wind (salt spray) directly.
• This can cause corrosion on the product.
Corrosion, particularly on the condenser and
evaporator fins, could cause product malfunction
or inefficient operation.
Make sure that the drainpipe is installed properly to
drain water. Arrange the drain hose to ensure smooth
drainage.
• Incomplete drainage may lead to water damage
done to the building, furniture, etc. If no water
is discharged from the drainpipe while the air
conditioner or heat pump is in the cooling mode,
it may be because the drainpipe has become
clogged with dust or dirt, and could result in
water leakage in the indoor unit. In such a
situation, stop operating the air conditioner or
heat pump and contact the dealer.
Do not install the product where the noise or hot
air from the outdoor unit could be harmful to your
immediate surroundings.
• Improper placement could cause problems for
your neighbors.
If anyone other than a licensed professional installs,
repairs, or alters LG Electronics air conditioning
products, the warranty is voided.
• All costs associated with repair are then the full
responsibility of the owner.
The Limited Warranty is void and of no effect, and
LG will have no liability hereunder to any Customer
or third party, to the extent any of the following occur:
acts, omissions, and conduct of any and all third
parties including, but not limited to, the installing
contractor and any repairs, service or maintenance
by unauthorized or unqualified persons.
Operation
If refrigerant gas leaks while the unit is being repaired
do not touch the leakaing refrigerant gas.
• The refrigernat gas can cause frostbite (cold
burn)
Do not mix air or gases other than the specified
refrigerant used in the system.
• Air entering the refrigerant system can lead to
excessively high pressure causing equipment
damage or injury.
Make sure that there are no obstacles close to the
outdoor unit. The presence of obstacles close to the
outdoor unit may reduce the performance of outdoor
unit or increase its operating sound.
• This could cause product failure.
Do not use the air conditioner for any other purposes
other than comfort cooling or heating. Do not use the
unit for cooling precision instruments, food, plants,
animals or works of art.
• Doing so could lead to risk of damage or loss of
property.
Replace all the batteries in the remote control with
new ones of the same type. Do not mix old and new
batteries or different types of batteries.
• Doing so could lead to a risk of fire or explosion.
Do not recharge or disassemble the batteries. Do not
dispose of batteries in a fire.
• They may burn or explode.
If the liquid from the batteries gets onto your skin or
clothes, wash it well with clean water. Do not use the
remote if the batteries have leaked.
• The chemicals in batteries could cause burns or
other health hazards.
Loading ...
Loading ...
Loading ...