Loading ...
Loading ...
Loading ...
42
Sound
No sound from home theater speakers.
• Connect the audio cable from your home
theater to your TV or other devices. You do
not need a separate audio connection when
the home theater and TV are connected
through an HDMI ARC connection.
• Set up the audio for the connected device
(see‘Setupaudioforconnecteddevices’on
page 17).
• Reset your home theater to its factory
settings(see‘Applyfactorysettings’onpage
37), then switch it off and switch on again.
• On your home theater, press SOURCE
repeatedly to select the correct audio input.
Distorted sound or echo.
• If you play audio from the TV through the
home theater, make sure that the TV is
muted.
Audio and video are not synchronized.
• 1) Press SOUND SETTINGS. 2) Press
the Navigation buttons (left/right) to select
AUD SYNC, and then press OK. 3) Press
the Navigation buttons (up/down) to
synchronize the audio with the video.
Play
Cannot play a disc.
• Clean the disc.
• Make sure that the home theater supports
thetypeofdisc(see‘Mediaformats’on
page 39).
• Make sure that the home theater supports
theregioncodeofthedisc(see‘Region
codes’onpage39).
• IfthediscisaDVD±RWorDVD±Rdisc,
makesurethatitisnalized.
Cannot play a DivX le.
• MakesurethattheDivXleisencoded
accordingtothe‘HomeTheaterProle’
with the DivX encoder.
• MakesurethattheDivXleiscomplete.
DivX subtitles do not display correctly.
• Makesurethatthesubtitlelenameisthe
sameasthemovielename(see‘Subtitles’
on page 23).
• Select the correct character set: 1) Press
OPTIONS. 2) Select [Character Set].
3) Select the supported character set. 4)
Press OK.
11 Troubleshooting
Warning
•
Risk of electric shock. Never remove the
casing of the product.
To keep the warranty valid, never try to repair the
product yourself.
If you have problems using this product, check the
following points before you request service. If you
still have a problem, register your product and get
support at www.philips.com/welcome.
Main unit
The buttons on the home theater do not work.
• Disconnect the home theater from the
power supply for a few minutes, then
reconnect.
Picture
No picture.
• Make sure that the TV is switched to the
correct source for the home theater.
No picture on a TV connected through HDMI.
• Make sure that you use a High Speed HDMI
cable to connect the home theater and TV.
Some Standard HDMI cables do not display
properly for some images, 3D video, or
Deep Color.
• Make sure that the HDMI cable is not faulty.
If it is faulty, replace it with a new cable.
• Press (Home) and then 731 on the
remote control to restore the default
picture resolution.
• Change the HDMI video setting, or wait for
10secondsforautorecovery(see‘Picture
resolution’onpage34).
Disc does not play high-denition video.
• Makesurethatthedisccontainshigh-
denitionvideo.
• MakesurethattheTVsupportshigh-
denitionvideo.
• Use an HDMI cable to connect to the TV.
EN
Loading ...
Loading ...
Loading ...