Loading ...
Loading ...
Loading ...
Cleaning and care
24
Changing a lamp
The lamps should be replaced with the
following:
Manufacturer................................ EGLO
Lamp type
.................................... GU10
Specification................................ 11427
Wattage........................................... 3 W
These lamps are available from Miele or
fr
om specialist retailers.
P
ull out the deflector plate, and
remove the grease filter as described
earlier.
Switch off the fan and the lighting.
Note that lamps become very hot
when in use.
They can cause burns even after
being switched off for some time.
Allow the lamps to cool down for a
few minut
es before changing them.
Remo
ve the charcoal filter if the
rangehood is being used in
recirculation mode.
Disconnect the rangehood from the
mains electrical supply before
replacing the lamps (see "Warning
and Safety instructions").
P
ush down the lighting unit slightly
via the opening in the safety panel.
T
urn the lamp anti-clockwise and pull
it out.
Scr
ew the new lamp into the socket
and push it upwards. Please follow
the manufacturer's safety
instructions.
Replace
the grease filter and, if being
used in recirculation mode, the
charcoal filter.
Loading ...
Loading ...
Loading ...