Loading ...
Loading ...
Loading ...
12
Switch to standby
1 Press POWER to switch the unit to
standby mode.
The backlight on the display panel is »
dimmed.
The clock (if set) appears on the »
display panel.
Note
If you are not going to use the remote control •
for a long time, remove the batteries.
Do not use old and new or different types of •
batteries in combination.
Batteries contain chemical substances, so they •
should be disposed of properly.
Set clock
1 Press and hold CLOCK/DISPLAY to
activate the clock setting mode.
The 12 hour or 24 hour format is »
displayed.
2 Press PROG repeatedly to select 12 hour
or 24 hour format.
3 Press CLOCK/DISPLAYtoconrm.
The hour digits are displayed and begin »
to blink.
4 Press / to set the hour.
5 Press CLOCK/DISPLAYtoconrm.
The minute digits are displayed and »
begin to blink.
6 Press / to set the minute.
7 Press CLOCK/DISPLAYtoconrm.
Tip
To view the clock during play, press • CLOCK/
DISPLAY repeatedly until the clock is
displayed.
Turn on
1 Press POWER.
The product switches to the last »
selected source.
EN
MC155_05_UM_V1.0.indb 12 2010-10-21 10:52:13
Loading ...
Loading ...
Loading ...