Loading ...
Loading ...
Loading ...
8
Find the studs, using one of the following
methods:
A. Stud finder – a magnetic device which
locates nails.
OR
B.Useahammertotaplightlyacrossthe
mounting surface to find a solid sound.
Thiswillindicateastudlocation.
Afterlocatingthestud(s),findthecenterby
probing the wall with a small nail to find the edges
ofthestud.Thenplaceamarkhalfwaybetween
theedges.Thecenterofanyadjacentstuds
should be 16 or 24 from this mark.
Draw a line down the center of the studs.
NOTE: THE MICROWAVE MUST BE
CONNECTED TO AT LEAST ONE WALL STUD.
1
Removetheinstallationinstructions,filters,glass
trayandthesmallhardwarebag.Donotremove
the foam protecting the front of the oven.
Foldbackall4cartonflapsfullyagainstcarton
sides.Thencarefullyrolltheovenandcartonover
ontothetopside.Theovenshouldberestingin
the foam.
REMOVING THE MICROWAVE OVEN
FROM THE CARTON/REMOVING
THE MOUNTING PLATE
FINDING THE WALL STUDS
B
.
A
.
2
PLACEMENT OF THE MOUNTING PLATE
1
Wall
Studs
Center
3
Carton
Pullthecartonupandofftheoven.
Removethe2screwsfromthemountingplate.
Thisplatewillbeusedastherearwalltemplate
andformounting.Youmaydiscardthesescrews.
Mounting
Plate
Screws
foam
Installation Instructions
2
3
5
Removeandproperlydiscardplasticbags.
4
1
1” = 2.5 cm; 1’ = 0.3 m
Loading ...
Loading ...
Loading ...