VSX-D850S User Manual

Loading ...

5 Point the two remote controls towards each

other. Press the button to be learned on this

receiver’s remote control (for example the 3

[play] button).

Point the remote controls directly at each other, about

1-2 inches apart, and press the button on the remote

control for the operation you want to program. The

LED flashes rapidly. For VSX-D850S, the LEARN icon

blinking.

6 Press the corresponding button on the other

remote control to be taught to this receiver’s

remote control (in the above example the 3

[play] button).

Point the remote controls toward each other.

Press the button on the other remote control

corresponding to the operation you wish to program.

The LED on this receiver’s remote will go out and

then resume a steady light if the operation is learned.

(For VSX-D850S model the LEARN icon will light

steadily and the LCD display will show “OK” if the

operation has been learned.) If the operation hasn’t

been learned for some reason the LED will blink for

three seconds and then light steadily. (For VSX-

D850S model the LCD will display “error” if the

operation hasn’t been learned.)

If this happens press the teaching key repeatedly,

varying the distances between the remotes, until you

see the LED on this unit’s remote light steadily,

without blinking first.

To program additional operations for the current

component

Repeat steps 5 and 6.

To program operations for another component

Repeat steps 2 through 6 (VSX-D850S).

Repeat steps 3 through 6 (VSX-D710S/D810S).

7 Press and hold SETUP for one second to exit

the LEARNING setup mode.

After thirty seconds of inactivity the remote control

will automatically leave the LEARNING mode and

revert to its previous mode.

MEMO:

• Some commands from other remote controls cannot

be learned, but in most cases the remotes just need to

be moved closer together or farther apart.

• Certain buttons represent modes that cannot be

learned from other remote controls. These include:

RCV, CH SELECT, CH LEVEL, FUNCTION

LOUDNESS, FL DIMMER, and MUTING.

• TV CONTROL buttons ( TV

, VOL +/-, and TV

FUNC ) can only be learned in TV & TVC mode.

Controlling the Rest of Your System

Learning Mode: Programming

Signals from other Remote

Controls

If preset codes are not available for your component(s),

or the available preset codes do not operate correctly,

you can use this function to program in signals from the

remote control(s) of your other component(s). This

operation can also be used after recalling a preset code

to program additional operations not covered in the

preset codes.

1 Press SETUP and hold for three seconds.

The LED on the remote control will light for two

seconds.

To cancel the Learning mode at any time

Press SETUP.

The remote control will also return to the previous

mode after thirty seconds of inactivity.

2 VSX-D850S only: Use the @ # buttons to

select the Learning mode.

The Learning mode is indicated by the Learning icon

(LEARN) in the remote’s LCD display.

3 Press the MULTI CONTROL button for the

component you want to control

4 VSX-D710S/D810S: Press and hold the

RECEIVER button for two seconds to start

the Learning mode.

The LED lights steadily.

To cancel LEARNING setup mode

Press SETUP for one second.

If no commands are entered within thirty seconds the

remote will revert to its previous mode.

TVFUNC

VOLUME

MASTER VOLUME

TV CONTROL

AV PRE-PROGRAMMED AND LEARNING

REMOTE CONTROL UNIT

CHANNEL

ENTER

DISC

DTV INFO

MPX/RETURN

DTV ON/OFF DTV MENU

D.ACCESS GUIDE

TUNE

CLASS

ATT

BAND

/DTS DSP

TEST TONE

CH SELECT CH LEVEL FUNCTION

SIGNAL SELECT

1¡

EFFECT

DVD VCR CD-RTV

RCV

TUN

TVC

MIDNIGHT

LOUDNESS

MUTING

SETUP

FL DIMMER

MULTI CONTROL

5.1 / 7.1

RECEIVER

SOURCE

LED

1,7

VSX-D710S/

D810S only

VSX-D850S only

1 - 2 inches