Loading ...
Loading ...
Loading ...
37
En
Setting Up Using Brand Name
Search (VSX-D850S only)
An alternative method of setting up the remote with
preset codes is to use the Brand Search feature. The
remote transmits batches of 10 codes; when you see the
component responding you just scan through those last
10 codes until you find the correct one.
1 Switch on the component you want to control.
If the component is some kind of player (CD player,
VCR, etc.), then start it playing.
Controlling the Rest of Your System
3 Use the @ # buttons to select the Full
Library Search mode.
The remote’s LCD display shows SEARCH.
4 Press the MULTI CONTROL button for the
component you want to control.
Each button can be set to control one of the following
components
DVD DVD/LD player or DVD Recorder
TV TV, Satellite tuner or Cable TV tuner
VCR VCR or Digital Video Recorder
CD CD player
CD-R CD Recorder, Tape deck
or MD player
TVC TV or Cable TV tuner
TUN FM/ AM tuner
5 Press and hold SETUP for two seconds.
A batch of 10 codes is transmitted and the LED
blinks during transmission.
If you see the component respond, by stopping (for
playback components only) or switching off, go on to
the step 6, otherwise repeat this step. After the ten
codes have been sent the search icon blinks.
If you want to cancel the search mode, press and
hold MUTING for two seconds.
6 Switch the component back on or restart
playback.
7 Use the % fi buttons to scan through the last
10 codes transmitted to identify the correct
code.
The transmission icon is on while the codes are sent
out. Stop when you see the component stop or
switch off. The LCD display shows the I.D.
You can also verify you have the correct code by
pressing PLAY, STOP., VOL +/–, etc.
8 Press and hold ENTER for three seconds to
save the preset code.
2 Press and hold SETUP for three seconds.
The remote’s LCD display shows SETUP.
The remote control will also return to the previous
mode after thirty seconds of inactivity.
3 Use the @ # buttons to select the Brand
Search mode, then press ENTER.
The remote’s LCD display shows BRAND SEARCH.
4 Press the MULTI CONTROL button for the
component you want to control.
Each button can be set to control one of the following
components
DVD DVD/LD player or DVD Recorder
TV TV, Satellite tuner or Cable TV tuner
VCR VCR or Digital Video Recorder
CD CD player
CD-R CD Recorder, Tape deck
or MD player
TVC TV or Cable TV tuner
TUN FM/ AM tuner
5 Use the % fi buttons to select the brand of
the component.
The brand names appear in the remote’s LCD display.
If the brand of your component doesn’t appear then
you can’t use this feature.
6 Press and hold SETUP for two seconds.
A batch of 10 codes is transmitted and the transmission
icon is on while the codes are sent out. After all ten
codes have been sent the search icon blinks.
If you see the component respond, by stopping (for
playback components only) or switching off, go on to
the step 6, otherwise repeat this step.
If you want to cancel the search mode, press and hold
MUTING for two seconds.
7 Switch the component back on or restart
playback.
8 Use the % fi buttons to scan through the last 10
codes transmitted to identify the correct code.
The transmission icon is on while the codes are sent
out. Stop when you see the component stop or
switch off. The display shows the I.D.
You can also verify you have the correct code by
pressing PLAY, STOP., VOL +/–, etc.
9 Press and hold ENTER for three seconds to
save the preset code.
Loading ...
Loading ...
Loading ...