Loading ...
Loading ...
Loading ...
Installation
9/23EN
Refrigerator / User Guide
3.4. Power connection
A
WARNING: Do not use extension or multi
sockets in power connection.
B
WARNING: Damaged power cable must
be replaced by Authorized Service.
C
When placing two coolers in adjacent
position, leave at least 4 cm distance
between the two units.
• Our firm will not assume responsibility for
any damages due to usage without earthing
and power connection in compliance with
national regulations.
• The power cable plug must be easily
accessible after installation.
• Connect the refrigerator to an earthed
socket with 110V/6 0 Hz voltage. The plug
mustcomprisea10-16Afuse.
• Donotusemulti-groupplugwithorwithout
extension cable between the wall socket
and the refrigerator.
3.5. Connecting the water
hose to the refrigerator
1. Slip the union (b) onto the water hose
(a).
2. Push the water hose downwards firmly
to slip it onto the water inlet valve (c).
3. Tighten the union (c) by hand to secure
it onto the water inlet valve.
C
Normally, you are not required to
tighten the union with a tool. However, you can
use a spanner or pliers to tighten the union if
there is a leakage
3.6. Connecting the water
line to the water supply
Connect the water line to a water supply valve.
If a valve is not present or you are not sure,
consult a qualified plumber.
Loading ...
Loading ...
Loading ...