Loading ...
Loading ...
Loading ...
Basic Operation & Riding
76
Starting & Stopping the Engine
The recoil starter is used to start the engine when the battery is low.
To operate the recoil starter:
1.
Turn the ignition switch to ON and engine stop switch to RUN.
2.
Check that the transmission is in neutral.
3.
Grasp the starter grip (1) firmly, then pull it out slowly
approximately 4 in (100 mm).
4.
Pull the grip up briskly and fully.
5.
After the engine starts, allow the starter grip to return slowly and
then let go.
If the starter grip does not return smoothly (because of dirt in the
assembly), see your dealer.
Using the Recoil Starter (Canada only)
RIGHT SIDE
(1)
(1) starter grip
19 TRX420TM1 FM1_31HR3650.book Page 76 Tuesday, April 3, 2018 11:37 AM
Loading ...
Loading ...
Loading ...