Loading ...
Loading ...
Loading ...
Servicing Your Honda
169
Brakes
Refer to Safety Precautions on page 101.
1.
Make sure the engine is OFF and the parking brake is set.
2.
Remove the rear brake drain bolt (1) and sealing washer from the
bottom of the rear brake panel.
If any water drains, the brake seals must be replaced by your
dealer as soon as possible.
3.
Install the rear brake drain bolt with a new sealing washer and
tighten it to the specified torque:
9 lbf·ft (12 N·m , 1.2 kgf·m)
Draining Water from Brakes
RIGHT REAR
(1) rear brake drain bolt
(1)
19 TRX420TM1 FM1_31HR3650.book Page 169 Tuesday, April 3, 2018 11:37 AM
Loading ...
Loading ...
Loading ...