Loading ...
Loading ...
Loading ...
User Manual BDL6545AT
RETURN TO THE CONTENTS
• Brightness - Select On and the brightness of the image will be reduced to an appropriate level, and the
Brightness setting in the Picture menu will become unavailable. Use the PLUS/MINUS button to make
selection.
• Pixel shift - Select the time interval for the display to slightly expand the image size and shift the pixel
position in four directions (up, down, left, and right). Use the PLUS/MINUS button to make selection
(Off-900 seconds from current time). The default time interval is 300 seconds. This helps to alleviate the
issues of ghost imaging.
IMPORTANT: It is not recommended to keep a single static image displayed on your unit for long periods
of time. This can cause image sticking, or ghost imaging, which will decrease the quality of your images. In
some instances, ghost image damage can be permanent. To avoid such issues, we strongly recommend one of
the following actions:
• Change the picture periodically
• Enable Pixel shift (See Pixel shift under Section 5.2.5.Configuration 1 MENU)
• Use a screen saver with changing images
Color system
Select the color system depending on the input video format.
Use the PLUS/MINUS button to toggle between
Configuration reset
Reset all settings in the Configuration 1 menu.
Use the PLUS/MINUS button to make selection. Select Reset and press SET to restore settings to
factory preset values. Press EXIT to cancel and return to the previous menu.
Factory reset
Reset all settings in the Picture, Screen, Audio, PIP, Configuration 1, Configuration 2, and
Advanced option menus, restoring them to factory preset values. Use the PLUS/MINUS button to make
selection. Select Reset and press SET to restore settings to factory preset values. Press the EXIT button
to cancel and return to the previous menu.
• Auto • NTSC
• PAL 3.58 • SECAM
Loading ...
Loading ...
Loading ...