Loading ...
Loading ...
Loading ...
2. Fill the water tank.
a. On the back of the unit, open the Easy
Fill opening of the water tank and use the
included water cup to fill the water tank with
water. Don’t overfill or water may spill from
the tank. For best results, water should be at
room temperature.
b . Close the Easy Fill opening.
c. The water tank holds 13oz. and will last
approximately 15 minutes depending on the
amount of the steam used during cleaning.
3. Pull and twist the Quick Release™ cord wrap
clockwise to unwrap the power cord completely
and plug into an outlet as described on the
Important Safety Instructions on page 2.
4. Adjust the handle for your most comfortable
cleaning height by pressing the tab at the base
of the handle with one hand and pulling the
handle up with your other hand.
NOTE: Upon the first use of the Symphony or
first use after refilling the water tank, the pump
may make a ‘knocking’ sound. This is normal
and could last up to 30 seconds.
www.BISSELL.com
7
Operatis
WARNING
Never put descaling, alcoholic, or detergent products
into the steam cleaner, as this may damage it or make
it unsafe for use.
2. 4.
» Use of distilled or demineralized water is recommended
to prolong the life of your hard floor cleaner. To add
a fresh scent as you clean, try BISSELL demineralized
waters in various scents like Citrus, Eucalyptus Mint and
Spring Breeze.
Tip
Loading ...
Loading ...
Loading ...