Loading ...
Loading ...
Loading ...
English - 21
Function LED Behavior Description
AV Delay
AV Delay
Press the Next/Previous button to increase/decrease the amount of audio
delay. The LED indicators will move to the top with increasing audio delay
levels.
TV Remote
VZtv Rmt On
Press the Next/Previous button to enable/disable VIZIO TV Remotes. When
enabled (On), you can use a VIZIO TV remote control to turn on the sound bar
(using the TV Volume Up button) and control volume.
Program Remote
Prg Remote
−−
Press the Next/Previous and Play buttons to toggle and select and program
your TV remote to control the Volume Down, Volume Up, and Mute functions
on your sound bar. See the
Programming the Sound Bar
section for more
information.
Eco Power On/O
Eco Pwr
Press the Next/Previous button to enable/disable Eco Power Mode. When
enabled (On), the sound bar will go into standby after a period of inactivity.
The sound bar will automatically turn o when no audio signal is detected. O
disables this feature. Note: If you would like to cast content without the need to
manually turn on the sound bar, set this function to OFF.
Power LED
Pwr LED
Press the Next/Previous and Play buttons to enable/disable the Power LED.
Speaker Test
Spkr Test
—
Press the Play/Pause button to activate the speaker test function. A voice will
begin calling out each speaker beginning with
left front
. (Left Front, Center,
Right Front, Left Front Height, Right Front Height, and subwoofer-white noise)
If any of these are missing, check the connection and run the speaker test
function again.
LED at the bottom
indicates no delay
TV Remote On
TV Remote O
Eco Power On
Eco Power O
Power LED On
Power LED O
Loading ...
Loading ...
Loading ...