Loading ...
Loading ...
Loading ...
English
8
Flat Beater, for normal to heavy mixtures,
such as:
cakes biscuits
creamed frostings crumpets
candies meat loaf
cookies mashed potatoes
pie pastry
Dough Hook for mixing and kneading yeast
doughs, such as:
breads coffee cakes
rolls buns
Using Your KitchenAid
®
Attachments
Beater to Bowl Clearance
Wire Whip for mixtures that need
to incorporate air, such as:
eggs sponge cakes
egg whites mayonnaise
heavy cream some candies
boiled frostings
Tilt Head
Lift motor head.
Turn screw (A) slightly to the left to raise
flat beater and to the right to lower flat
beater.
Make adjustment with flat beater, so it just
clears surface of bowl.
Your mixer is adjusted at the factory so that
the flat beater just clears the bottom of the
bowl. If, for any reason, the flat beater strikes
the bottom of the bowl, or is too far away
from the bowl, clearance can be corrected as
follows:
A
Bowl Lift
Place bowl lift handle
in down position.
Turn screw (B) slightly to
the left to raise flat beater
and to the right to lower
flat beater.
Make adjustments with
flat beater, so it just clears surface of bowl.
NOTE: Flat beater must not strike on bottom or side
of bowl when properly adjusted. If beater or wire
whip is adjusted too close so that it strikes bottom
of bowl, coating may wear off of beaters or wires
may wear through on wire whip.
Scraping sides of bowl may be necessary under
certain conditions regardless of beater adjustment.
Mixer must be stopped to scrape bowl or damage
to mixer may occur.
Bowl, flat beater, and dough hook may be
washed in an automatic dishwasher. The wire
whip and these other basic accessories can be
cleaned thoroughly in hot sudsy water and
rinsed completely before drying.
Lubrication: Motor bearings are self-
lubricating and should require no further
attention under normal use.
ELECTRICAL SHOCK HAZARD
ALWAYS BE SURE TO UNPLUG
MIXER BEFORE CLEANING TO AVOID
POSSIBLE ELECTRICAL SHOCK.
Wipe mixer with a damp cloth. DO
NOT IMMERSE IN WATER. Wipe off
beater shaft frequently, removing any
residue that may accumulate.
wWARNING
Care and Cleaning of Your Mixer
B
Your mixer is adjusted at the factory so that
the flat beater just clears the bottom of the
bowl. If, for any reason, the flat beater strikes
the bottom of the bowl, or is too far away
from the bowl, clearance can be corrected as
follows:
See the Stand Mixer Attachments Use and Care Guide for speed settings and operating times.
Loading ...
Loading ...
Loading ...