Loading ...
Loading ...
Loading ...
English
Before You Call For Service
Please read the following before calling
your service center.
1. The mixer may warm up during use. Under
heavy loads with extended mixing time
periods, you may not be able to comfortably
touch the top of the unit. This is normal.
2. The mixer may emit a pungent odor,
especially when new. This is common with
electric motors.
3. If flat beater strikes bowl, stop the mixer.
See “Beater to Bowl Clearance.”
If your mixer should malfunction or fail to
operate, please check the following:
1. Is your mixer plugged in?
2. Is the fuse in the circuit to the mixer in
working order? If you have a circuit breaker
box, be sure the circuit is closed.
3. Are the bowl and pouring shield* properly
in place?
4. Model 5KPM50 is equipped with an
overload device. If the mixer is overloaded,
the Overload Reset Button will pop out and
the mixer will shut off (see page 7). Turn the
Speed Control Lever to OFF. Wait a few
minutes, then push in the Overload Reset
Button. Turn the Speed Control Lever to the
desired speed and continue mixing.
HOW TO OBTAIN SERVICE:
All service should be handled locally by an
authorized KitchenAid Service Center. Contact
the dealer from whom the unit was purchased
to obtain the name of the nearest authorized
KitchenAid service facility.
*Included with some models.
12
Specifications subject to change without notice.
®Registered trademark/
TM
Trademark/the shape
of stand mixer is a registered trademark of KitchenAid, U.S.A.