Loading ...
Loading ...
Loading ...
22
SETTING OVEN CONTROLS
NOTE
Each oven temperature can be individually adjusted.
The oven temperature adjustments made with this feature
will not change the Self-Clean cycle temperature or the
Broil temperature.
The oven temperature adjustments are permanent and
will stay forever in the unit memory unless you manually
change it again. Even a power outage will not reset
these changes. Follow the same procedure again if you
wish to change it to a different setting.
OVEN LIGHT
Each oven is equipped with an oven light. The oven light
will turn on automatically, when the oven door is opened.
The oven light may be turned on when the door is closed
by using the oven light pad located on the control panel.
The oven light key will toggle the lights at full intensity.
TotoggletheOvenLightsONandOFF:
1. Press UPPER or LOWER to select oven.
2. Press OVEN LIGHT
.
The interior oven lights are covered with a glass shield
held by a wire holder. The glass shield must be in place
whenever the oven is in use.
To change the interior oven lights, see "Changing the
oven light" in the Care & Cleaning section.
ADJUSTING OVEN TEMPERATURE
The temperature in the oven has been pre-set at the
factory. When rst using the oven, be sure to follow
recipe times and temperatures. If you think the oven
is cooking too hot or too cool for the temperature you
select, you can adjust the oven temperature to be more
or less than what is displayed. Before adjusting, test a
recipe by using a temperature setting that is higher or
lower than the recommended temperature. The baking
results should help you to decide how much of an
adjustment is needed.
Toadjusttheoventemperaturehigher
1. Press UPPER or LOWER to select oven.
2. Press BAKE for 6 seconds. "UPO 00" will appear in
the display.
3. To increase the temperature use the number pads
to enter the desired change (Example 30°F) 30.
The temperature may be increased as much as 35°F
(19°C).
4. Press START to accept the temperature change and
the display will return to the time of day. Press OFF
to reject the change if necessary.
Toadjusttheoventemperaturelower
1. Press UPPER or LOWER to select oven.
2. Press BAKE for 6 seconds. "UPO 00" will appear in
the display.
3. To decrease the temperature use the number pads
to enter the desired change (Example -30°F) 30
and then press CLEAN. The temperature may be
decreased as much as 35°F (19°C).
4. Press START to accept the temperature change and
the display will return to the time of day. Press OFF
to reject the change if necessary.
NOTE
For best results when cooking, keep the oven light off
unless checking food.
The oven light will not operate during a self-Clean cycle.
Loading ...
Loading ...
Loading ...