Loading ...
Loading ...
Loading ...
6
TYPES OF REGULATION
Please note that depending on the loading and settings chosen it takes 24hours for the
Beverage Center to see the temperature stabilizing.
During this time LED seems to move erratically. It is a normal process. This process
occurs whenever the setting is modified and/or whenever a large amount of bottles are
added to the unit.
TEMPERATURE SETTINGS
Important: The LCD displays by default the actual internal air temperature.
The temperature settings are pre-set at the factory setting of 5 ºC. In the event of a power
interruption, all previous temperature settings are automatically erased and it will revert to
the preset temperature settings.
It is important to understand that there is a difference between the air temperature inside
the Beverage Center and the actual temperature of the Beverage: You will need to wait
approximately 12 hours before noticing the effects of temperature adjustment due to the
critical mass within a full Beverage Center.
Once the thermostat is set, it is strongly advised not to toy with it or adjust frequently. The
thermostat will maintain the temperature inside the Beverage Center within a +/- 2.5ºC
range. But the thermal inertia of the Beverage and the glass is such that within this
temperature range, the actual temperature of the Beverage will only fluctuate 0.5ºC to 1ºC.
The controls of your beverage center
Adjust the desired cooling temperature by pressing the UP or DOWN buttons. Each
depression of the buttons will scroll through the available temperature settings in
increments of 1 degree Celsius. The temperature setting can be adjusted from 2 to 10
To visualize the “set” temperature, press and hold the UP or DOWN buttons, the “set”
temperature will temporarily “flash” in the LED display for 5 seconds.
Loading ...
Loading ...
Loading ...