Loading ...
Loading ...
Loading ...
en Operating the appliance
32
Remaining running time
display
When the programme is selected, the
remaining programme time is indicated
in the display window @.
The running time is determined during
the programme by the water
temperature, the quantity of dishes as
well as the degree of soiling and may
vary (depending on the selected
programme).
Time preselection *
Ti me pr es el ec t i on
* depending on the configuration of
your specific dishwasher
You can delay the start of the
programme by up to 24 hours.
Here’s how to set up the delay:
1. Switch on ON/OFF switch (.
2. Press the timer programming button
P - or +.
The display window @ shows
‹‹h:‹‹m.
3. Keep pressing the timer
programming button P - or + until
the desired time is displayed.
4. Press START button X.
The delay timer has been activated.
5. To clear the specified delay, press
the button P - or + repeatedly until
the display window @ shows
‹‹h:‹‹m.
Programme end
The programme has finished when the
value ‹‹h:‹‹m appears in the display
window @.
Switching off the appliance
Shortly after the end of the
programme:
1. Switch off ON/OFF switch (.
2. Turn off water supply (does not
apply to appliances with Aqua-Stop).
3. Remove the utensils when they have
cooled down.
Note: When the programme ends,
leave the appliance to cool down a
while before opening it. This will prevent
steam from escaping and causing
long-term damage to your built-in
furniture.
Interrupting the programme
Caution!
Expansion (overpressure) may cause
the appliance door to jump open and/or
water to escape! If the door was opened
on an appliance which has a hot water
connection or is heated, always leave
the door ajar for several minutes and
then close it.
1. Switch off ON/OFF switch (.
The LEDs go out. The programme is
saved.
2. Switch on the ON/OFF switch (
again to continue the programme.
Loading ...
Loading ...
Loading ...