Loading ...
Loading ...
Loading ...
Operating the appliance en
31
Auto Power Off (Automatic
switch off after end of
programme)
Au t o Po wer Off
To save energy, the dishwasher is
switched off 1 minute after
the programme ends. You can also
change this setting.
Possible settings are:
■ ˜:‹‹: The dishwasher does not
switch off automatically.
■ ˜:‹‚: The dishwasher switches off
after 1 minute.
■ ˜:‹ƒ: The dishwasher switches off
after 2 hours.
Note: Note that with the settings ˜:‹‚
and ˜:‹ƒ the interior lighting 1" is
switched off. To activate the interior
lighting, press the ON/OFF switch (.
EmotionLight (Interior
lighting) *
Emot i onLi ght
* depending on the configuration of
your specific dishwasher
EmotionLight 1" is the interior lighting
for your dishwasher. You can switch the
interior lighting on “:‹‚ or off “:‹‹.
Notes
■ Depending on the setting of
AutoPowerOff, the interior lighting is
either switched on or off.
■ Note that when the appliance is
switched on and the door is open,
the interior lighting will automatically
be switched off after 1 hour.
Changing start programme
The Eco 50° programme for
environmentally friendly operation is
always preselected when the appliance
is switched on. You can change the
“Start programme” setting. With the
setting †˜:‹‹, the most recently
selected programme will always appear
when the appliance is switched on.
Tone volume
Whenever you switch the dishwasher on
or off, a signal sounds. You can adjust
the tone volume from †–:‹‹ - †–:‹„.
Button volume
When you are operating the dishwasher,
a signal sounds whenever a button is
pressed. You can adjust the volume of
the tone from ›–:‹‹ - ›–:‹„. If the
signal tone is annoying, set the value to
›–:‹‹ (button volume off).
Factory setting
You can reset all settings to the factory
setting.
Switching on the appliance
1. Turn tap fully on.
2. Switch on ON/OFF switch (.
The Eco 50° programme has been
preset for environmentally friendly
operation whenever the appliance
starts. This programme remains
selected if no other programme
button 0 is pressed.
3. Press START button X.
Programme sequence starts.
Note:
For ecological reasons the Eco 50°
programme is preset whenever the
appliance starts. This conserves
environmental resources and not least
saves you money.
The Eco 50° programme is a
particularly environmentally friendly
programme. According to EU
regulation 1016/2010 it is the
“Standard programme” which is the
most efficient standard cleaning cycle
for cleaning normally soiled utensils in
terms of the combined energy and
water consumption for cleaning these
types of utensils.
Loading ...
Loading ...
Loading ...