Loading ...
Loading ...
Loading ...
10
OPTION SELECTIONS
OPTIONS CAN BE
SELECTED
WITH
WHAT IT DOES ADDED
TIME TO
CYCLE
ADDED
WATER
GALLONS
(LITERS)
Raises main wash temperature to improve cleaning for
loads containing tough, baked-on food.
Sensor
Heavy
Normal
Raises the main
wash temperature
to 130°F (54°C).
0:00 to 0:40 0 to 3.0
(0 to 11.2)
Sanitizes dishes and glassware in accordance with NSF
International NSF/ANSI Standard 184 for Residential
Dishwashers. Certied residential dishwashers are not
intended for licensed food establishments. Only sanitizing
cycles have been designed to meet the requirements of
the NSF/ANSI 184 performance standard for soil removal
and for sanitization efcacy. There is no intention, either
directly or indirectly, that all cycles on a NSF/ANSI 184
certied dishwasher meet the NSF/ANSI 184 performance
standard for soil removal and for sanitization efcacy.
At end of the cycle, the “Sanitized” indicator will glow. If
your load did not properly sanitize, the indicator will ash
at the end of the cycle. This can happen if the cycle is
interrupted, or if the water does not reach the required
temperature. The light goes off when you open and close
the door or
press CANCEL.
Sensor
Heavy
Normal
Raises the main
wash temperature
to 140°F (60°C)
and the nal rinse
temperature to
156°F (69°C).
0:00 to 2:20 1.2 to 6.2
(4.8 to 23.3)
Can be selected with any cycle for washing a small load of
dishes in the top rack.
Available
with any
cycle
Saves up to
0:20
0
Dries dishes with heat. This option, with the use of rinse
aid, will provides better drying performance. Plastic items
are less likely to deform when loaded in the top rack. Use
Heat Dry for optimum dry performance. Turn the Heat Dry
option off for air dry.
Any cycle Uses heating
element to speed
drying times.
Heat Dry option
defaults to On
when any cycle is
selected, except
for 1 Hour and
Rinse Only.
0:10 to 0:50 0
Delays the start of the cycle for 4 hours.
To delay the start:
1. Select a wash cycle and options.
2. Press DELAY WASH.
3. Press START/RESUME to begin 4 hour delay.
NOTE: If the door is opened (such as to add a dish), the
START/RESUME button must be pressed to resume the
delay countdown.
Available
with any
cycle
Delays the start
of a cycle for a
maximum of
4 hours.
Loading ...
Loading ...
Loading ...