Loading ...
Loading ...
Loading ...
10 EN
6 Put the pre-lter back into the
appliance (g. g).
Note
• Make sure that the side with the two
clips is pointing towards you, and that
all hooks of the pre-lter are properly
attached to the purier.
7 To reattach the front panel, mount
the panel onto the top of the
appliance rst (1). Then, gently push
the panel against the body of the
appliance (2) (g. h).
8 Touch and hold the reset button
for 3 seconds to reset the pre-lter
cleaning time (g. x).
Cleaning the pre-lter
(g. v)
Filter alert light
status
Follow this
F0 displays on the
screen
Clean the pre-
lter
1 Switch o the air purier and
unplug from the wall outlet.
2 Pull the bottom part of the front
panel to remove it from the
appliance (g. d).
3 Press the two clips down and pull
the pre-lter towards you (g. e).
4 Wash the pre-lter under a running
tap. If the pre-lter is very dirty, use
a soft brush to brush away the dust
(g. w).
5 Air dry the pre-lter.
Note
• To optimize the lifetime of the pre-
lter, make sure it dries completely
after cleaning.
• Wash your hands after handling the
lter.
Loading ...
Loading ...
Loading ...