Loading ...
Loading ...
Tools and Parts
Gather the recommended tools and parts before starting
installation. Read and follow the instructions provided with
any tools listed here.
All Installations
Tools needed:
*Must be the proper size to connect your household wiring
to 16-gauge wiring in dishwasher
Other useful items you may need:
Parts supplied:
Make sure all these parts are included in the literature package.
Parts needed:
4 #10 x ¹⁄₂" wood screws (if installing custom front panels)
Wire stripper
Small
tubing cutter
Cordless drill
with ¹⁄₂", ³⁄₄"
and 1¹⁄₂" hole
saw bits
Pliers
UL Listed/CSA
Approved twist-on
wire connectors*
wrench
Small level
Utility knife
Phillips
screwdriver
Measuring tape
or ruler
10" adjustable wrench
that opens to
Flat-blade
screwdriver
nut drivers or
hex sockets
If installing custom front panels,
Torx
®†
T15 screwdriver
""
"
"
INSTALLATION REQUIREMENTS
Copp
O.D. suggested) or
flexible braided
water supply line
For Direct Wire:
use UL Listed/
CSA Approved
strain relief
hole
See “Electrical Requirements” section.
For Power Supply
Cord: use UL
Listed/CSA
Approved power
supply cord kit
marked for use with
dishwasher
Flashlight
Bath towel
Wood block
Shallow pan
3
Masking or
duct tape
(3.81–5 cm)
Screw-type
clamps (3 maximum)
Moisture
barrier tape
(Part Number
4396277).
Torx
®
T15 screws
"
"
Bottom sound pad
(located in lower rack)
Supplied in Kit:
4 Plastic studs (attached to each other by runners)
4 Short screws (10-16 hex head screw)
4 Long screws (8-18 Torx
®†
head screws)
1 Template (located inside Use and Care Guide bag
assembly)
1 Instruction sheet (located inside Use and Care Guide bag
assembly)
NOTE: The screws supplied are used for only ³⁄₄" thick
wooden panel. If the wooden panel is less than ³⁄₄" thick,
customer must purchase screws locally.
Other parts you may also need:
NOTE:
Moisture barrier tape is recommended when installing a
dishwasher under a wood countertop.
NOTE:
Parts available for purchase in plumbing supply stores.
Check local codes. Check existing electrical supply. See
“Electrical Requirements” section. It is recommended that
electrical connections be made by a licensed electrical installer.
In addition, for first-time installations
Tools needed:
Parts needed:
Additional parts supplied with top-venting models only:
Additional parts supplied with certain models only:
Make sure all these parts are included in the literature package.
If parts are not included, call 1-800-422-1230.
†® TORX is a registered trademark of Saturn Fasteners, Inc.
Drain hose
Drain hose
clamps (2)
(1 large and
1 small)
Phillips-
head
screws (2)
Green
Silver
2 – under-
counter
mounting
brackets (top)
2 –
custom
tape
Loading ...
Loading ...
Loading ...