2010 X5 XDRIVE48I User Manual

Loading ...

Controls

Reference At a glanceDriving tipsCommunications NavigationEntertainmentMobility

Everything under control

Odometer, outside

temperature display, clock

1 Knob in the instrument cluster

2 Time, outside temperature, and date

3 Odometer and trip odometer

Knob in the instrument panel

> With ignition switched on

Press knob:

Resetting trip odometer

Press the knob for approx. 5 seconds:

Displaying service requirements, refer to

page 74

> With ignition switched off

Press knob:

Briefly displaying time, outside temperature

and odometer

Units of measure

To select the respective units of measure, miles

or km for the odometer as well as 7 or 6 for

the outside temperature, refer to page 80.

The setting is stored for the remote control cur-

rently in use.

Time, date, outside temperature

From radio readiness the outside temperature

and the time are displayed.

Setting the time, refer to page 79.

Retrieving date

Press the button on turn signal lever upward;

the date appears.

To set the date, refer to page 80.

Pressing the button upward or downward sev-

eral times changes the display between clock,

outside temperature, date, and Check Control

messages, refer to page 78.

Outside temperature warning

If the display drops to +377/+36, a signal

sounds and a warning lamp lights up. A mes-

sage appears on the Control Display. There is

an increased danger of ice.

Even at temperatures above +377/

+36 ice can form. Therefore, drive care-

fully, e.g. on bridges and sections of road in the

shade, otherwise there is an increased accident

risk.<

Odometer and trip odometer

Resetting trip odometer:

Press knob 1 in the instrument panel with the

ignition switched on.

When vehicle is parked

To briefly display the time, outside temperature

and mileage after the remote control has been

removed from the ignition lock:

Press knob 1 in the instrument panel.

ba8_e70ag.book Seite 71 Freitag, 5. Juni 2009 11:42 11

Loading ...

User Manual - Page 73