CPX3010N User Manual

Loading ...

IMAGE menu

From the IMAGE menu, items shown in the table

below can be performed.

Select an item using the ▲/▼ cursor buttons, and

press the ► cursor button or ENTER button to

execute the item. Then perform it according to the

following table.

Item Description

ASPECT

Using the ▲/▼ buttons switches the mode for aspect ratio.

For a computer signal

NORMAL

4:3

16:9

16:10

For a video signal, s-video signal or component video signal

4:3

16:9

14:9

For no signal

4:3 (xed)

• The NORMAL mode keeps the original aspect ratio of the signal.

OVER SCAN

Using the ◄/► buttons adjusts the over-scan ratio.

Small (It magnies picture)

Large (It reduces picture)

• This item can be selected only for a video, s-video and component

video signal.

• When this adjustment is too large, certain degradation may appear

at the frame area of the picture. In such a case, please adjust small.

V POSITION

Using the ◄/► buttons adjusts the vertical position.

Down

• Over-adjusting the vertical position may cause noise to appear on

the screen. If this occurs, please reset the vertical position to the

default setting. Pressing the RESET button when the V POSITION

is selected will reset the V POSITION to the default setting.

• When this function is performed on a video signal, s-video signal,

or component video signal, the range of this adjustment depends

on OVER SCAN (



above) setting. It is not possible to adjust when

OVER SCAN is set to 10.

H POSITION

Using the ◄/► buttons adjusts the horizontal position.

Left

Right

•

Over-adjusting the horizontal position may cause noise to appear on

the screen. If this occurs, please reset the horizontal position to the

default setting. Pressing the RESET button when the H POSITION is

selected will reset the H POSITION to the default setting.