Loading ...
Loading ...
Loading ...
Main menu: K
ey detector
*6
Sub-menu 1 Sub-menu 2 Settings Code
Search
#655
Battery check
*1 If you program these settings using one of the units, you do not need to program the same
i
tem using another unit.
*2 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
*3 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select Caller ID auto. To turn this feature off, select
Manual. (Caller ID subscribers only)
To use this feature, set the date and time first (page 12).
*4 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (tone 1 to
2). If you select a melody, you cannot distinguish lines by their ringers.
*5 The preset melodies in this product (Tone 3 - Melody 10) are used with permission of
© 2004 - 2013 Copyrights Vision Inc.
*6 This setting is available when you have the key detector (KX-TGA20). Read the installation
manual for more information on the key detector.
*7 For models with supplied key detectors, the display shows1: Detector1”.
*8 If you register 2 or more key detectors.
*9 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
*10 The flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary. The setting should stay at 700 ms unless pressing MACCEPTN fails
to pick up the waiting call.
*11 Generally, the line mode setting should not be changed. This setting automatically maintains
receiver volume at the proper level depending on the current telephone line condition. Set
the line mode to A if telephone line condition is not good.
28
For assistance, please visit http://shop.panasonic.com/support
Programming
TGL43x(en)_0603_ver101.pdf 28 2016/06/03 17:30:18
Loading ...
Loading ...
Loading ...