Loading ...
Loading ...
Loading ...
37
Safety features of your vehicle
Adjusting the height up and down
To raise the head restraint, pull it up to
the desired position (1). To lower the
head restraint, push and hold the release
button (2) on the head restraint support
and lower the head restraint to the
desired position (3).
Removal
To remove the head restraint, raise it as
far as it can go then press the release
button (1) whilst pulling upward (2).
To reinstall the head restraint, put the
head restraint poles (3) into the holes
whilst pressing the release button (1).
Then adjust it to the appropriate height.
Active head restraint (if equipped)
The active head restraint is designed to
move forward and upward during a rear
impact. This helps to prevent the driver's
and front passenger’s heads from mov-
ing backward and thus helps prevent
neck injuries.
HNF2041-1/H
WARNING
Make sure the head restraint locks
in position after adjusting it for
proper protection of the occupants.
WARNING
A gap between the seat and the
head restraint release button may
appear when seating on the seat or
when you push or pull the seat. Be
careful not to get your finger, etc.
caught in the gap.
OJC030007 OJC030008
Loading ...
Loading ...
Loading ...