Loading ...
Loading ...
Loading ...
• CAUTnON !
When you remove the end caps, a
small metal washer on each end
may come off. DO NOT lose these
two metal washers,
,J_t
TO CLEAN AGITATOR
NOTE: tn order to keep cleaning efficiency
high and to prevent damage to your vacu-
um, the__itator must be cleaned every time
the belt is changed.
The agitator must also be cleaned accord-
ing to the following schedule:
Vacuum Use Clean Agitator
HEAVY -
(used daily)
MODERATE -
(used 2-3 times/week)
LIGHT -
(used 1 time/week)
every week
every month
every 2 months
Remove any dirt or debris in the belt path
area or in the brush roller area°
Exploded View - Agitator
Assembly
Felt Washer
Agitator Unit
Felt Washer
End
Cap
End
Cap
Carefully remove
any string or
debris located on
the agitator, end
caps or agitator
bearing°
TO REPLACE BELT
Make sure that the carpet/bare floor
selector is in the carpet position_
Loop the new belt on the motor shaft.
Motor
Shaft
New
Belt
Belt
. Carpet/Bare
Floor Selector Shaft
Belt
Groove
NOTE: See PARTS AND FEATURES for
belt number.
Loop the end of the new belt on the brush
assembly.
Align the square extension on each end
cap with the slots in the frame of the
nozzle.
Nozzle -
Nozzle slot
Slot
NOTE: Care must be taken due to the
belt tension during reassembly.
17
Loading ...
Loading ...
Loading ...