Loading ...
Loading ...
Loading ...
INSTALLATION INSTRUCTIONS
Warning! Refer to "Safety information"
chapter.
Before the installation, note down
the serial number (Ser. Nr.) from the
rating plate. The rating plate of the
appliance is on its lower casing.
PNC: 949163124
Made in China Model: PHN644DU
APP NO.: 55GADD5AU
AU APP NO.: S/91
S NO.: 50Hz 7.4 KW
220 - 240 V AC
~ 220 - 240 V
PNC: 949163193
Made in China Model: PHN944DU
APP NO.: 55GCDD5AU
AU APP NO.: S/91
S NO.: 50Hz 7.4 KW
220 - 240 V AC
~ 220 - 240 V
PNC: 949163199
Made in China Model: PHN744DU
APP NO.: 55GADD5AU
AU APP NO.: S/91
S NO.: 50Hz 7.4 KW
220 - 240 V AC
~ 220 - 240 V
BUILT-IN APPLIANCES
• Only use the built-in appliances after you
assemble the appliance into correct built-
in units and work surfaces that align to
the standards.
CONNECTION CABLE
• Use the correct mains cable of type
H05BB-F Tmax 90°C (or higher) for a sin-
gle phase or two phase connection.
• Replace the damaged mains cable with a
special cable (type H05BB-F Tmax 90°C
or higher). Speak to your local Service
Centre.
TO ATTACH THE SEAL.
• Clean the worktop in the area of the cut
out section.
• Bond the seal stripe supplied on the low-
er edge of the appliance along the outer
edge of the glass ceramic. Do not extend
it. Let stay the cut ends in the middle of
one side. When, you cut it to length (add
some mm), push the two ends together.
ASSEMBLY
min.
50mm
min.
50mm
min.
500mm
min.
5mm
4 westinghouse
Loading ...
Loading ...
Loading ...