Loading ...
Loading ...
Loading ...
16
Installation instructions
Rear compartment cover installation
1
Using the measurement guide located on the rear compartment cover. Mark out 16mm (⁄”),
onthe end of the tubing (refer to Diagram 10).
2
Firmly insert the marked water tube into the water (solenoid) valve until the marked line is not
visible (refer to Diagram 11).
3
Pull gently on tubing to ensure it is locked (refer to Diagram 12).
4
The completed installation should look like Diagram 13. Turn isolating tap on and check that all
connections are dry and free of drips.
5
Coil water line tubing behind the refrigerator and push into position being careful not to kink or
squash the water line running into the water (solenoid) valve.
The water filtration system is tested and certified by NSF International against NSF/ANSI
Standard 53 for the reduction of Asbestos, Atrazine, Benzene, Cyst, Carbofuran, Lead, Lindane,
Mercury, P-Dichlorobenzene, Toxaphene & Turbidity; against Standard NSF/ANSI 42 for
the reduction of Chlorine Taste and Odour and Nominal Particulate Class I to a capacity of
2,838Litres (750 gallons).
Diagram 13
Completed installation
Diagram 11
Diagram 12Diagram 10
Loading ...
Loading ...
Loading ...