Loading ...
Loading ...
Loading ...
INSTALLATION INSTRUCTIONS
5. Check that the two (2) cotter pins were removed with the
shipping strap.
NOTE: To prevent floor damage, set the washer onto cardboard
before moving across floor.
Removing the shipping strap is necessary for proper operation. If
the shipping strap is not removed, the washer will make
excessive noise.
1. Move the washer to within approximately 3 ft (90 cm) of the
final location.
2. The washer must be in the upright position and not tilted
before removing the shipping strap.
3. Locate the yellow shipping strap on the rear of the machine
near the bottom.
4.
A. Yellow shipping strap
Pull yellow shipping strap firmly, until both ends are
completely removed from washer.
Proper connection of the drain hose protects your floors from
damage due to water leakage. Read and follow these
instructions.
The drain hose is connected to your washer and is stored inside
the washer cabinet.
Remove drain hose from washer cabinet
Gently pull the corrugated drain hose out of the washer from the
top of the hose. Continue to pull the hose until the end emerges.
Do not force excess drain hose back into the rear of the washer.
\
Loading ...
Loading ...
Loading ...