Loading ...
Loading ...
Loading ...
16
Troubleshooting
TROUBLESHOOTING GUIDE
Before carrying out any of the following service checks, unplug the unit from the power outlet.
PROBLEM POSSIBLE CAUSES WHAT TO DO
Dehumidifier not
working.
•
Power plug is disconnected.
•
The tank is full of water.
•
The tank is not in the right
position.
•
Plug the power cord into the power socket.
•
Empty the water tank.
•
Position the water tank correctly in the unit.
Dehumidification has
reduced in power.
•
The filter is too dirty.
•
The air inlet or outlet are
blocked.
•
Clean the filter.
•
Remove the object that is blocking the air
inlet or outlet.
Loud noises coming
from the dehumidifier.
•
The dehumidifier is on an
uneven surface.
•
Position the dehumidifier on a smooth and
stable surface.
The dehumidifier
suddenly stops.
•
The room humidity level may
be outside of the radar of the
dehumidifier.
•
The dehumidifier will start again
automatically when it can read the room
humidity level again.
Clothing dries
very slowly.
•
The room temperature is
too low.
•
The wet clothes are not
exposed to the air from the
unit.
•
If the room temperature is too low, the
clothing will dry slower than usual.
•
Place the wet clothes closer to the unit so
they are exposed to the air flow.
No reduction of
humidity in the room.
•
The room is too large for the
unit’s scope.
•
Doors and windows in the
room are open.
•
Move to a smaller room.
•
Close any doors or windows in the room.
WARNING
This dehumidifier uses a refrigerant compressor. The noise from the compressor turning off and
on during operation is normal.
LAD500_ANZ_IB_C19.indd 16 8/4/19 1:38 pm
Loading ...
Loading ...
Loading ...