FFHB2740PS Use & Care

Loading ...

INSTALLING DOOR HANDLES

CAUTION

Wear gloves and safety goggles. Use extreme CAUTION when installing these handles.



NOTE

All set screws should be tightened so the screw is below the surface of the handle. The handles

should be drawn tight to freezer and refrigerator doors with no gaps. Opening the opposite door

while tightening the Allen screw makes installation easier.

The door handle may loosen over time or if it was installed improperly. If this happens, tighten the

set screws on the handles.

Door Handle Mounting

Instructions for Frigidaire

1 Remove handles from carton and

any other protective packaging.

2 Position fresh food handle end caps

over upper and lower pre-installed

shoulder bolts (A) that are fastened

into door, ensuring the holes for the

set screws are facing towards the

opposite door.

 3 Whileholdinghandlermlyagainst

door, fasten upper and lower Allen set

screws (B) with supplied Allen wrench.

4 Repeat steps 2 and 3 to install

opposite handle. Ensure the holes

for the set screws are facing

towardstherstdoor.

5 Position freezer handle end caps

over left and right pre-installed

shoulder bolts that are fastened to

the door, ensuring the holes for the

set screws are facing down.

 6 Whileholdinghandlermlyagainst

door, loosely tighten right Allen

set screw (B) with supplied Allen

wrench until there is no gap

between handle and door.

 7 Stillholdingthehandlermlytothe

door,rmlytightenleftAllenset

screw (B) with supplied Allen wrench.

8 Return to the right Allen set screw

(B)andrmlytightenwithsupplied

Allen wrench.

Mounting Freezer Handle

Mounting Refrigerator Handles

Loading ...

Use & Care - Page 13