Loading ...
Loading ...
Loading ...
Quality of Flames
The combustion quality of burner flames needs to
be determined visually.
If burner flames look like (A), call for service. Normal burner
flames should look like (B) or (C), depending on the type of gas
you use.
With LP gas, some yellow tipping on outer cones
is normal.
(C) Soft blue
flames—Normal for
natural gas
(B) Yellow tips on
outer cones—
Normal for LP gas
(A) Yellow flames—
Call for service
Check Ignition of Oven Burner
The oven is designed to operate quietly and
automatically. To operate the oven, press the
BAKE
pad and then press the number pads until
350°
appears in the display. Touch the
START
pad.
After 30-90 seconds, the oven burner will ignite
and burn until the set temperature is reached.
The oven burner will continue to cycle on and
off as necessary to maintain the oven at the
temperature indicated by the display.
To check ignition of the broil burner, touch the
BROIL HI/LO
pad and then the
START
pad. After
30-90 seconds, the broil burner will ignite.
Electric ignition models
require electrical power to
operate. In case of a power outage, the oven
burners on these models cannot be lit manually
with a match. Gas will not flow unless the glow bar
is hot.
If the oven is in use when a power outage occurs,
the burner will shut off and cannot be re-lit until
power is restored.
Read these instructions completely and carefully.
Operating Instructions
50
Safety InstructionsInstallation InstructionsTroubleshooting TipsConsumer Support
Installation of the range.
Loading ...
Loading ...
Loading ...