Loading ...
Loading ...
Loading ...
6
Cycle Status Lights
The Cycle Status Lights show the progress of a cycle. At each
stage of the process, you may notice sounds or pauses that are
different from traditional washers.
Door Locked
Door Locked will light to indicate that the door is locked and
cannot be opened without rst pausing or canceling the cycle.
FanFresh
®
Option
The FanFresh
®
indicator will light when the FanFresh
®
option
is active. During this time, the washer will occasionally tumble
the load while a fan circulates fresh air through the washer.
X Conc.
If a Detergent Concentration is being set, the X Conc.
indicator will light and the concentration will appear in the
display. You can change the detergent concentration by
pressing the DETERGENT CONCENTRATION button.
Sensing
When the START/PAUSE button is pressed, the washer will
rst perform a self-test on the door lock mechanism. You will
hear a click, the drum will make a partial turn, and the door
will unlock briey before locking again.
Once the door has locked the second time, the washer will
begin tumbling and adding water. This sensing process will
continue until the correct amount of water has been added
for the load. You may also hear water owing through the
dispenser, adding detergent to the load.
After the load size is sensed, the estimated time based on
load size will be displayed. This is normal.
Detergent Level
OK – This will light if there is adequate detergent in
the Precision Dispense cartridge.
Low – This will light if there is enough detergent in
the Precision Dispense cartridge for only a few more
cycles.
Empty – This will light if there is no detergent in the Precision
Dispense cartridge.
NOTE: These status lights only come on at the beginning and
during the initial wash portion of the cycle during dispensing.
After the dispensing portion of the cycle, the lights turn off.
Dispense Detergent
This will light when the detergent is being dispensed.
Add a Garment
When Add a Garment is lit, you may pause the washer, open
the door, and add items.
Steam
This will light to show that the cycle is using steam for added
cleaning power.
Sanitized
Sanitized will light on cycles with a Sanitize setting once
the load has been washed at the proper temperature for
the necessary time to meet NSF Sanitization requirements.
Done
Once the cycle is complete, this light will come on.
Remove the load promptly for best results.
Loading ...
Loading ...
Loading ...