Loading ...
Loading ...
Loading ...
Installation
15
Door removal
Remove the
freezer
compartment
door
1) Removing the hinge cover by loosening the
screws. Separate all connection wires.
2) Remove the keeper by rotating it counter
clockwise (c) and then lifting the upper hinge
up (d).
3) Remove the freezer compartment door by lifting it
upward. This time, the door should be lifted
enough for the feed water pipe tube to be
completely pulled out.
•
When removing the upper hinge, be careful that
the door does not fall forwards.
NOTE
•
Move the refrigerator compartment door passing through the access door and lay it
down, but be careful not to damage the feed water pipe tube.
NOTE
Connection
wires
Hinge
cover
Upper
hinge
Keeper
Upper hinge
Electric Shock Hazard
Disconnect electrical supply to refrigerator
before installing. Failure to do so could
result in death or serious injury.
If your access door is too narrow for the
refrigerator to pass through, remove the
refrigerator door and pass the
refrigerator laterally.
Feed water tube
Lower hinge
Engough for
water feed pipe tube
to be completely
pulled out
WARNING
Must be cut vertically
when cutting the tube.
(Leak otherwise.)
Non-vertical Damaged Increased
Guide line is completely
inserted when only one
guide line is showing out
of two.
Open the door and turn
the hose to inner side
Water hoses are should
be behind the leg to
prevent the damage.
Loading ...
Loading ...
Loading ...