Loading ...
Loading ...
Loading ...
4 5
Instruction For Use
Double Wall Water Kettle
With Temperature Control
and press the on/o button (7).
This will lash until the water either
reaches the required temperature
or boils, at which point it will
extinguish.
An acoustic signal indicates
when the water has reached the
selected temperature. The water
can now be used.
Note: to change the required
temperature of the water while
it is heating, simply turn the
temperature selection knob (8).
Note: dierent teas require
dierent brewing temperatures.
Brewing a delicate variety at too
high a temperature can make it
taste bitter. The BODUM® water
kettle with adjustable temperature
settings is ideally suited to
preparing any type of tea. There
are ive temperature settings to
choose from. (60°C; 70°C; 80°C;
90°C and boil)
«Keep warm» function
To keep the water at the required
temperature for 30 minutes, press
the «keep warm» button (9).
The «keep warm» button (9) will
remain illuminated until the kettle
is removed from its base (6), the
button is pressed again, or 30
minutes have expired.
Note: The «keep warm» function
only works in combination with
ON/OFF-button (7). The «keep
warm» button (9) can be pressed
before switching the kettle on
(You need to press the ON/OFF
button (7) within 5 seconds after
pressing the «keep warm» button)
(9), or while the water is heating.
After the water has reached the
required temperature, it is needed
to press «keep warm» button (9)
and ON/OFF button (7) again.
Switching o
The kettle switches o
automatically when the water
comes to the boil or reaches the
required temperature.
The kettle can be switched o at
any time by pressing the on/o
button (7). The kettle switches o
automatically when it is removed
from its base (6).
Pouring the water
Holding the kettle by its handle,
lift it from its base (6). Check the
kettle remains upright while lifting
it from its base (6).
Pour the water from the spout
keeping the lid (1) closed.
Note: take care not to scald
yourself while pouring the water.
Switching the kettle back on
If the kettle has been switched o
manually, it can be switched back
on at any time.
MAINTENANCE AND CARE
Scale ilter (2)
Scale, or calcium, is a natural
substance that forms when hard
water is boiled. The ilter (2) serves
to retain the calcium in the water
kettle.
Cleaning and removal of the ilter
It is important to clean the ilter
(2) regularly. The ilter (2) clips into
the body and can be removed by
pulling it upwards from the body. It
can be cleaned by gentle brushing
with a soft brush under running
water.
Kettle clean and decale
Remove scale using either a
proprietary de-scaling product
suitable for plastic kettles
(following the instructions
carefully), or citric acid.
We recommend using citric acid
as follows:
Boil 1l/34oz litre of water, then
unplug the kettle and stand it in an
empty sink or bowl. Add 50gm of
citric acid crystals gradually, then
leave the kettle to stand.
As soon as the eervescence
subsides, empty the kettle and
rinse it thoroughly with cold water.
Wipe the outside of the kettle
thoroughly with a damp cloth to
remove all traces of citric acid
which may damage the inish.
Do not use a more concentrated
solution. Ensure that the electrical
connections are completely dry
before using the kettle. Citric acid
crystals are available at most
chemists.
Failure to de-scale may invalidate
the guarantee.
Never use chemicals, steel wool
or abrasive agents to clean the
exterior of the kettle.
Only clean the appliance using a
damp cloth.
Never immerse the item in water:
remember this is an electrical
applicant.
Storage
Note: Ensure that the mains power
supply is switched o when you
are not using the kettle.
Any other servicing should be
performed by an authorized
service representative.
Loading ...
Loading ...
Loading ...