Loading ...
Loading ...
Loading ...
Automatic Icemaker & Dispenser
Stainless Steel Refrigerator
WATER CRUSHED CUBEDICE LIGHT
OFF ON
To stop
dispensing
Release pressure from the dispenser pad and
wait a few seconds to catch the last bits of ice or
drops of water.
There may be some dripping after dispensing
crushed ice or water. If there is a lot of dripping,
the spill should be wiped dry right away.
Do not pour water in the spill shelf because it is
not self draining—pour it in the kitchen sink.
The shelf and its grille should be cleaned
regularly according to Care and Cleaning
instructions. The grille is easily removed by
pressing on the back right corner.
Press here to
remove grille.
If ice clumps
form in the
storage bin
The icemaker ejects cubes in groups of 8, and
it is normal for several cubes to be joined
together. However, if you don’t use the ice very
often, ice clumps may form in the storage bin
and can clog the dispenser.
If this happens:
• Remove the storage bin from the freezer.
• Break up ice clumps with your hands. Throw
away any clumps that you can’t break up.
• Replace the bin before the remaining cubes
melt and fuse together.
To remove
ice storage
bin
Lift the left corner to free the bin from the
shelf. Pull the bin straight out while supporting
it at front and back.
To replace
ice storage
bin
Slide the bin back until the tab on the bin locks
into the slot in the shelf.
If the bin does not go all the way back, remove it
and turn the drive mechanism 1/4 turn. Then
push the bin back again until the tab on the
bin locks into the slot in the shelf.
10
Drive
Mechanism
Rotate
Loading ...
Loading ...
Loading ...