Loading ...
Loading ...
Loading ...
X Error messages X What to do when...
Troubleshooting
Message Cause / Remedy
Battery Low! The batteries are weak.
If using AAA alkaline batteries, replace them
with new ones.
If using Ni-MH batteries, charge them fully.
Battery
Empty!
The installed batteries are running low and
need to be replaced for continued operation.
Invalid!
selected [Numbering].
r was selected for
[Numbering].
s selected for [Tab
Length] or [Label Length].
tape length while using templates.
No Text
data stored in the memory.
entered.
was entered while using templates.
2 Line Limit!
1 Line Limit!
installed. Install a larger tape size.
No
Cassette!
There is no cassette installed.
Cutter
Pressed
middle of the printing process.
Text Full!
Change
Length
Auto
tape length.
No Frame OK?
ON, but a cassette narrower than
to cancel.
Feed OK? Chain
Print] is selected. Refer to the Setting
Margin section in this guide.
Insert
0.47"
cassette.
Use TZe
Tape!
Problem Solution
The display
stays blank
turned on the
machine.
inserted.
is correctly connected.
When the
printed out,
there is too
much margin
Setting Margin section in this
guide and select [Half] , [Narrow] or
[Chain
The machine
does not print,
or the printed
characters are
not formed
properly.
correctly.
The setting has
cleared on its
own.
display settings are cleared.
A blank
horizontal line
appears through
the printed
and-down motion.
The machine
has “locked up”
happens when a
key is pressed,
Resetting the P-Touch section
in this guide.
The power
turns off when
you try to print.
inserted.
he wrong AC Adapter is used. We
Adapter.
The tape does
not feed properly
or the tape gets
stuck inside the
machine.
the tape guides.
format settings
need to be
cleared to
create a new
[Text&Format].
Clear]
[Text&Format]
To change
language
setting.
Initial Settings section in this
guide.
Loading ...
Loading ...
Loading ...