Loading ...
Loading ...
Loading ...
Important Notes to the Installer
1. Readallinstructionscontainedintheseinstallation
instructionsbeforeinstallingthecooktop.
2. Removeallpackingmaterialbeforeconnectingthe
electricalsupplytothecooktop.
3. Observeallgoverningcodesandordinances,
4. Besuretoleavetheseinstructionswiththeconsumer.
Important Note to the Consumer
Keep these instructions with your Useand Care Guide for
future reference.
Depth Adjustment Filler Kit #903051o9010
This cooktop isdesigned to replace existing unit. If the
depth of your countertop opening is bigger than 7Y4" (18.4
cm) and lessthan 8Y2" (21.6 cm) you (:an order a free filler
kit #903051-9010 by calling SearsParts & Repair Center at
1-800-4-MY-HOME@.
Optional Item Available:
A 9" (22.9cm) Stainless Steel Backsplash
Kit #903048-9010
This kit can be ordered for purchase through SearsParts
& Repair Center at 1-800-4-MY-HOME@.
IMPORTANT SAFETY
NS
Be sure your cooktop is installed and grounded
properly by a qualified installer or service
technkian.
These cooktops must be electrically grounded in
accordance with local codes or, in their absence,
with the National Electrical Code ANSJ/NFPA No.
70--latest edition in the United States, or with
CSA Standard C22.1, Canadian Electrical Code, Part
1, in Canada.
_The electrical power to the cooktop
must be shut off while line connections are being
made. Faiture to do so coutd resutt in serious injury
or death.
Provide Electrical Connection
Install the junction box under the cabinet and run 120/
240 or 120/208 Volt, AC wire from the main circuit
panel. NOTE: DO NOT connect the wire to the circuit
panel at this time.
Electrical Requirements
Observe all governing codes and local ordinances.
1. A 3-wire or 4-wire single phase 120/240 or 120/208
Volt, 60 Hz AC only electrical supply is required on a
separate circuit fused on both sides of the line (time-
delay fuse or circuit breaker is recommended). DO
NOT fuse neutral. The fuse size must not exceed the
circuit rating of the appliance specified on the
nameplate.
2. This unit can consume up to 1!,400W at 240 Vac. A
circuit breaker of 50 Amp with wire gauge #8AWG
shall be used.
NOTE: Wire sizesand connections must conform with
the fuse size and rating of the appliance in accordance
with the National Electrical Code ANS!/NFPA No. 70-
latest edition and local local codes and ordinances.
An extension cord must not be used
with this appJiance, Such use may result in a fire,
eJectricat shock, or other personat injury_
3. The appliance should be connected to tile fused
disconnect (or circuit breaker) box through flexible
armored or nonmetallic sheathed cable. The flexible
armored (:able extending from this appliance should
be connected directly to the grounded junction box.
The junction box should be located as shown in
Figure 3 with as much slack as possible remaining in
the cable between the box and the appliance, so it
can be moved if servicing is ever necessary.
4. A suitable strain relief must be provided to attach
tile flexible armored cable to the junction box.
Unpacking Instructions
1. Unpack and visually inspect the cooktop.
2. Be sure the bottle of cleaner conditioner packed in tile
literature bag is left where the user can find it easily. It
is important that the cerami(>glasscooktop be
pretreated before use. See Cooktop CJeaning and
Maintenance section in the Use and Care Guide.
Loading ...
Loading ...
Loading ...