Loading ...
Loading ...
Loading ...
TIMER OPERATION
This water-resistant digital cook timer provides both countup and
countdown features in hours, minutes, and seconds.
To set the time to countdown:
• Press the Start / Stop: button to turn on the
backlight.
• Press the HR button (1) to set the number of hours. Hold
the button down to fast forward digits (maximum setting: 99
hours) (4).
• Press the MIN button (2) to set the number of minutes. Hold
the button down to fast forward digits (maximum setting: 59
minutes) (5).
• When the time is set, press the Start / Stop:
button
(3) to start the countdown.
• When the time is up, the alarm will sound for 30 seconds and
automatically restart countdown from previous time setting.
IMPORTANT
When the timer has over an hour left on the countdown,
H and M (Hours and Minutes) will flash on and off;
numbers will countdown every minute. When the timer
has less than an hour of time left, H and M turn to M and
S (Minutes and Seconds) and the seconds countdown;
numbers will start to countdown every second.
To clear the time:
• Press the Start / Stop: button to turn on the
backlight.
• Press the HR and MIN:
buttons simultaneously (1)(2).
To set the time to countup:
• Press the Start / Stop: button to turn on the
backlight.
• Press the Start / Stop:
button again to start
countup. While counting up, display will show the reading in
hour/minute and minute/second formats.
• Press the Start / Stop:
button twice to stop timer.
The countup will stop after 99 hours (4), 59 minutes (5).
6
7
8
4
5
1 2
3
Automatic shut off:
• To save battery life, the backlight turns off after 10 seconds.
The timer will turn completely off after 10 minutes of
inactivity.
Note: If using the timer in an environment that subjects it to
electrostatic discharge (static electricity) the time setting may be
lost. If this happens, reset the timer.
Battery installation:
• Use a Phillips screwdriver to unlock the battery compartment
on the back of the timer (6) by turning the screw clockwise.
• Remove the battery cover from the back of the timer (7).
• Add or replace the AAA batteries (8).
• Replace the battery cover.
• Lock the battery cover by turning the screw counterclockwise
with a Phillips screwdriver.
• After the batteries are installed, (
0000) will display on the
LCD screen.
Maintenance:
• Do not clean the timer with an abrasive or corrosive
compound. Doing so may scratch it or corrode the electronic
circuits.
• Do not subject the timer to excessive force, shock, dust, or
expose it to excessive temperatures or humidity. Doing so
may result in it malfunctioning, shorter electronic life span,
battery damage, or distorted parts.
• Do not tamper with the internal components of the timer.
Doing so will invalidate the timer’s warranty and may cause
unnecessary damage to the battery and internal parts.
• Do not subject the timer to excessive exposure to direct
sunlight or heavy rain.
• Do not immerse the timer in water.
For best performance, it is recommended to bring
the timer indoors while not in use.
WWW.WEBER.COM
®
19
Loading ...
Loading ...
Loading ...