Loading ...
Loading ...
Loading ...
(431,1)
北米Model "A1747BE-B" EDITED: 2019/ 12/ 19
Right-hand side
Right-hand side: Use a screwdriver to
undo the clips on the air intake duct, then
remove the air intake duct.
2. Disconnect the electrical connector
from the bulb as pushing the tab.
Left-hand side
Right-hand side
3. Left-hand side: Remove the bulb from
the headlight assembly by turning it
counterclockwise.
Right-hand side: Remove the bulb from
the headlight assembly by turning it clock-
wise.
4. Replace the bulb with a new one. At
this time, use care not to touch the bulb
surface.
5. To install the bulb to the headlight
assembly, turn it to the reverse direction
until it clicks.
6. Reconnect the electrical connector.
7. Left-hand side: Set the washer fluid
filler pipe to the original place and secure it
by a clip.
Right-hand side: Install the air intake duct
with clips.
& Low beam headlight*, front
side marker light, parking
light* and front turn signal
light*
S11BE45
*: Models without LED headlights
NOTE
. If headlight aiming is required, con-
sult your SUBARU dealer for proper
adjustment of the headlight aim.
. It may be difficult to replace the
bulbs. Have the bulbs replaced by your
SUBARU dealer if necessary.
1. Start the engine and turn the steering
wheel fully in the opposite direction of the
bulb to be replaced.
– CONTINUED –
Maintenance and service/Replacing bulbs
11-45
11
Loading ...
Loading ...
Loading ...