Loading ...
Loading ...
Loading ...
(373,1)
北米Model "A1747BE-B" EDITED: 2019/ 12/ 19
& Towing with all wheels on the
ground
S09AF03
1. Release the parking brake and put the
transmission in the “N”/neutral position.
2. The ignition switch should be in the
“ON” position while the vehicle is being
towed.
3. Take up slack in the towline slowly to
prevent damage to the vehicle.
WARNING
. Never turn the ignition switch to
the “LOCK”/“OFF” position while
the vehicle is being towed be-
cause the steering wheel and the
direction of the wheels will be
locked.
. Remember that the brake booster
and power steering do not func-
tion when the engine is not run-
ning. Because the engine is
turned off, it will take greater
effort to operate the brake pedal
and steering wheel.
CAUTION
. If transmission failure occurs,
transport your vehicle on a flat-
bed truck.
. Sometime damaged vehicles can-
not be towed because of their
damaged conditions.
In this case, use a flat-bed truck
for transportation.
. For CVT models, the traveling
speed must be limited to less
than 20 mph (32 km/h) and the
traveling distance to less than 31
miles (50 km). For greater speeds
and distances, transport your
vehicle on a flat-bed truck.
. Use a flat-bed truck if there are a
long distance downgrades or
steep slopes. However, do not
apply the brake pedal for a long
time because the engine braking
will not work while towing. Doing
so could over heat the brake.
. Drive carefully and do not make
an impact on the towing rope by
suddenly starting.
. Use a specific towing rope for
towing. If wire ropes and metal
chains are needed to be used for
towing, wrap the contact portion
of the bumper with cloth to pro-
tect it from damage.
In case of emergency/Towing
9-25
9
Loading ...
Loading ...
Loading ...