Loading ...
Loading ...
Loading ...
9
70
PRACTICAL INFORMATION
Refi tting the wheel
1. Position the wheel.
2. Screw in the bolts fully by hand.
Removing the wheel
1. Remove the trim.
2. Release the wheel bolts using the
wheelbrace 1 .
3. Place the jack 2 in contact with
one of the four locations A pro-
vided on the underframe, the
one closest to the wheel to be
changed.
4. Extend the jack 2 until its base is
in contact with the ground. Ensure
that the centreline of the jack base
is directly below the location A
used.
5. Lift the vehicle.
6. Remove the bolts and detach the
wheel.
3. Pre-tighten * using the wheel-
brace 1 .
* If your vehicle is fi tted with alloy wheels, when tightening the bolts it is normal
to notice that the washers do not come into contact with the spare wheel. It is
fi xed securely.
Loading ...
Loading ...
Loading ...