Loading ...
Loading ...
Loading ...
7
63
DRIVING
EASY mode (automatic mode)
Select position E using the gear lever.
The gear engaged is displayed on
the instrument panel screen.
The gearbox continuously selects
the most suitable gear.
If you press the accelerator pedal
beyond the point of resistance, the
2 Tronic gearbox selects the gear be-
low to permit sharper acceleration.
Manual mode
Place the gear lever in position M ,
then change up or down through the
gears by pressing:
- rearwards, "+" to change up,
- forwards, "-" to change down.
The gear engaged is displayed on
the instrument panel screen.
In the event of under-revving, to pre-
vent any risk of stalling, the gear be-
low is selected automatically.
In the event of overheating of the
clutch, position N is selected auto-
matically and the symbol N fl ashes
accompanied by an audible signal.
Operating fault Stopping the vehicle
Before switching off the engine, you
can change to position N to be in
neutral.
In all cases, it is essential that you
apply the handbrake to immobilise
the vehicle.
With the ignition on, the
lighting of this warning light
indicates a gearbox mal-
function.
On a slope, use the brake to
immobilise the vehicle and
place the gear lever in posi-
tion N , E or R .
Do not keep the vehicle immobilised
using the accelerator.
It is compulsory to press the
brake pedal while starting
the engine.
Never select neutral N while
the vehicle is moving.
In all cases, it is essential to
apply the handbrake to im-
mobilise the vehicle.
Consult a PEUGEOT dealer.
Loading ...
Loading ...
Loading ...