Loading ...
%
6WDUW
5HVHWVHF
K PLQ
K
$
&
K
5HVHWVHF
Loading ...
Loading ...
Loading ...
- *9000846969*
- 9000846969 aus (9212) 640MG
- 8 Intended use
- Intended use
- ( Safety instructions
- Safety instructions
- Before you switch ON the appliance
- Delivery
- 1. Check the packaging and dishwasher immediately for damage caused in transit. Do not switch on a damaged appliance, but contact your supplier.
- 2. Please dispose of the packaging material in an environmentally friendly manner.
- 3. Do not let children play with packaging and its parts. There is a risk of suffocation from collapsible boxes and film.
- Installation
- In daily use
- Childproof lock (door lock)Door lock *
- Childproof lock (button lock)Button lock
- Damage
- Disposal
- 7 Protection of the environment
- * Getting to know your appliance
- , Rinse aid
- Rinse aid
- Setting amount of rinse aid
- 1. Close the door.
- 2. Switch on ON/OFF switch (.
- 3. Hold down programme button # and press START button ` until š:‹.... is indicated on the digital display.
- 4. Release both buttons.
- 5. Press programme button # until the factory set value §:‹† is indicated on the digital display )".
- To change the setting:
- Switching off rinse aid refill indicator
- - Utensils
- Utensils
- Not suitable
- Glass and utensil damage
- Loading the dishwasher
- Unloading the dishwasher
- Cups and glasses
- Pans
- Cutlery basket
- EtagereEtagere *
- Folding spikesFolding spikes *
- Small accessories holder *Small accessories holder
- Knife shelf *Knife shelf
- Adjusting the height of the basketAdjusting the height of the basket *
- 22 cm
- 30 cm
- 24.5 cm
- 27.5 cm
- 27 cm
- 25 cm
- 24 cm
- 33 cm
- 26.5 cm
- 30.5 cm
- 29 cm
- 28 cm
- Top basket with side levers
- 1. Pull out the top basket 1* out.
- 2. To lower the basket, press in the left and then the right lever on the outside of the basket. In doing so, hold the sides of the basket along the upper edge to prevent it from suddenly dropping.
- 3. To raise the basket, hold the basket on the sides of the upper edge and lift it up.
- 4. Before re-inserting the basket again, ensure that it is at the same height on both sides. Otherwise, the appliance door cannot be closed and the upper spray arm will not be connected to the water circuit.
- Top basket with upper and lower roller pairs
- . Detergent
- Top basket with side levers
- / Overview of programmes
- Overview of programmes
- The max. possible number of programmes is illustrated in this overview. The corresponding programmes for your appliance can be found on the fascia. The programme data has been measured in the laboratory according to AS/NSZ 2007.
- Type of utensils and soiling
- Programm
- Programme data
- 1.) Duration: hs/ mins
- 2.) Energy consumption in kWh
- 3.) Water consumption in litres
- 4.) With Aquasensor
- Possible additional options
- Programme sequence
- Programme selection
- Information for test institutes
- 0 Additional options
- 1 Operating the appliance
- Operating the appliance
- Aqua sensorAqua sensor *
- Switching on the appliance
- Programme sequence indicatorProgramme sequence indicator h
- Remaining running time display
- Timer programmingTimer programming *
- 1. Close the door.
- 2. Switch on ON/OFF switch (.
- 3. Press button P + until the digital display )" jumps to œ:‹‚.
- 4. Press P + or – button until the displayed time corresponds with your requirements.
- 5. Press START button `, timer programming is activated.
- 6. To delete timer programming, press the P + or – button until )" œ:‹‹ is indicated on the digital display.
- End of programme
- Automatic switch off after end of programme or interior light*Automatic switch off / interior light
- Switching off the appliance
- Interrupting the programme
- Terminating the programmeTerminating the programme (Reset)
- Changing the programme
- Intensive drying
- 2 Cleaning and maintenance
- Cleaning and maintenance
- Overall condition of the machine
- Rinse aid
- Filters
- 1. After each washing cycle check the filters for residue.
- 2. Unscrew filter cylinder as illustrated and take out filter system.
- 3. Remove any residue and clean filters under running water.
- 4. Re-install filter system in reverse sequence and ensure that the arrow marks are opposite each other after closing the filter system.
- Spray arms
- 3 Fault, what to do?
- Fault, what to do?
- Note
- Waste water pump
- 1. First always disconnect the appliance from the power supply.
- 2. Take out top basket 1* and bottom basket 1b.
- 3. Remove the filters 1R.
- 4. Scoop out water, use a sponge if required.
- 5. Prise out the white pump cover (as illustrated) using a spoon. Grip the cover on the crosspiece and lift diagonally inwards. Remove cover completely.
- 6. Check impeller wheel and remove any foreign objects.
- 7. Place cover in the original position and press down until it engages (click).
- 8. Install filters.
- 9. Re-insert baskets.
- Fault table
- Fault
- Cause
- Remedial action
- 4 Customer service
- 5 Installation and connection
- Installation and connection
- Product package
- Safety instructions
- Delivery
- Technical specifications
- Installation
- Waste-water connection
- Fresh water connection
- Electrical connection
- Removing the appliance
- Transportation
- Drain the appliance according to the following steps:
- 1. Turn on the tap.
- 2. Close the door.
- 3. Switch on ON/OFF switch (.
- 4. Select programme with the highest temperature.
- 5. Press START button `.
- 6. After approx. 4 minutes press the START button ` until ‹:‹‚ is indicated on the digital display.
- 7. Switch off ON/OFF switch (.
- 8. Turn off the tap, disconnect supply hose and drain water.
- Drain the appliance according to the following steps:
- Protection against frostProtection against frost (Emptying the appliance)
- *9000846969*
- 9000846969 aus (9212) 640MG