%JTIXBTIFS
BVT0QFSBUJOHJOTUSVDUJPOT
Loading ...
Loading ...
Loading ...
User Manual
For SMU65M25AU.
Summary of Contents for Bosch SMU65M25AU:
- *9000846969*1
- 9000846969 aus (9212) 640MG1
- 8 Intended use2
- Intended use2
- ( Safety instructions2
- Safety instructions2
- Before you switch ON the appliance2
- Delivery3
- 1. Check the packaging and dishwasher immediately for damage caused in transit. Do not switch on a damaged appliance, but contact your supplier.3
- 2. Please dispose of the packaging material in an environmentally friendly manner.3
- 3. Do not let children play with packaging and its parts. There is a risk of suffocation from collapsible boxes and film.3
- Installation3
- In daily use4
- Childproof lock (door lock)Door lock *4
- Childproof lock (button lock)Button lock4
- Damage4
- Disposal5
- 7 Protection of the environment6
- * Getting to know your appliance7
- , Rinse aid8
- Rinse aid8
- 1. Open the dispenser 1j by pressing and lifting the plate on the cover.8
- 2. Carefully pour rinse aid up to the max. mark in the filler opening.8
- 3. Close cover until it clicks shut.8
- 4. To prevent excessive foam formation during the next rinse cycle, remove any rinse aid which has run over with a cloth.8
- Setting amount of rinse aid8
- 1. Close the door.8
- 2. Switch on ON/OFF switch (.8
- 3. Hold down programme button # and press START button ` until š:‹.... is indicated on the digital display.8
- 4. Release both buttons.8
- 5. Press programme button # until the factory set value §:‹† is indicated on the digital display )".8
- To change the setting:8
- Switching off rinse aid refill indicator9
- Rinse aid8
- - Utensils9
- Utensils9
- Not suitable9
- Glass and utensil damage9
- Loading the dishwasher9
- Unloading the dishwasher9
- Cups and glasses10
- Pans10
- Cutlery basket10
- EtagereEtagere *11
- Folding spikesFolding spikes *11
- Small accessories holder *Small accessories holder11
- Knife shelf *Knife shelf11
- Adjusting the height of the basketAdjusting the height of the basket *12
- 22 cm12
- 30 cm12
- 24.5 cm12
- 27.5 cm12
- 27 cm12
- 25 cm12
- 24 cm12
- 33 cm12
- 26.5 cm12
- 30.5 cm12
- 29 cm12
- 28 cm12
- Top basket with side levers12
- 1. Pull out the top basket 1* out.12
- 2. To lower the basket, press in the left and then the right lever on the outside of the basket. In doing so, hold the sides of the basket along the upper edge to prevent it from suddenly dropping.12
- 3. To raise the basket, hold the basket on the sides of the upper edge and lift it up.12
- 4. Before re-inserting the basket again, ensure that it is at the same height on both sides. Otherwise, the appliance door cannot be closed and the upper spray arm will not be connected to the water circuit.12
- Top basket with upper and lower roller pairs12
- . Detergent13
- Top basket with side levers12
- / Overview of programmes15
- Overview of programmes15
- The max. possible number of programmes is illustrated in this overview. The corresponding programmes for your appliance can be found on the fascia. The programme data has been measured in the laboratory according to AS/NSZ 2007.15
- Type of utensils and soiling15
- Programm15
- Programme data15
- 1.) Duration: hs/ mins15
- 2.) Energy consumption in kWh15
- 3.) Water consumption in litres15
- 4.) With Aquasensor15
- Possible additional options15
- Programme sequence15
- Programme selection16
- Information for test institutes16
- 0 Additional options16
- 1 Operating the appliance17
- Operating the appliance17
- Aqua sensorAqua sensor *17
- Switching on the appliance17
- Programme sequence indicatorProgramme sequence indicator h17
- Remaining running time display17
- Timer programmingTimer programming *17
- 1. Close the door.17
- 2. Switch on ON/OFF switch (.17
- 3. Press button P + until the digital display )" jumps to œ:‹‚.17
- 4. Press P + or – button until the displayed time corresponds with your requirements.17
- 5. Press START button `, timer programming is activated.17
- 6. To delete timer programming, press the P + or – button until )" œ:‹‹ is indicated on the digital display.17
- End of programme17
- Automatic switch off after end of programme or interior light*Automatic switch off / interior light18
- 1. Close the door.18
- 2. Switch on ON/OFF switch (.18
- 3. Hold down programme button # and press START button ` until š:‹... is indicated on the digital display.18
- 4. Release both buttons.18
- 5. Keep pressing programme button # until the value ˜:‹... is indicated on the numerical display )".18
- To change the setting:18
- Switching off the appliance18
- Interrupting the programme18
- Terminating the programmeTerminating the programme (Reset)19
- Changing the programme19
- Intensive drying19
- 2 Cleaning and maintenance19
- Cleaning and maintenance19
- Overall condition of the machine19
- Rinse aid20
- Filters20
- 1. After each washing cycle check the filters for residue.20
- 2. Unscrew filter cylinder as illustrated and take out filter system.20
- 3. Remove any residue and clean filters under running water.20
- 4. Re-install filter system in reverse sequence and ensure that the arrow marks are opposite each other after closing the filter system.20
- Spray arms20
- 3 Fault, what to do?21
- Fault, what to do?21
- Note21
- Waste water pump21
- 1. First always disconnect the appliance from the power supply.21
- 2. Take out top basket 1* and bottom basket 1b.21
- 3. Remove the filters 1R.21
- 4. Scoop out water, use a sponge if required.21
- 5. Prise out the white pump cover (as illustrated) using a spoon. Grip the cover on the crosspiece and lift diagonally inwards. Remove cover completely.21
- 6. Check impeller wheel and remove any foreign objects.21
- 7. Place cover in the original position and press down until it engages (click).21
- 8. Install filters.21
- 9. Re-insert baskets.21
- Fault table22
- Fault22
- Cause22
- Remedial action22
- 4 Customer service29
- 5 Installation and connection29
- Installation and connection29
- Product package29
- Safety instructions29
- Delivery30
- Technical specifications30
- Installation30
- Waste-water connection30
- Fresh water connection31
- Electrical connection31
- Removing the appliance32
- Transportation32
- Drain the appliance according to the following steps:32
- 1. Turn on the tap.32
- 2. Close the door.32
- 3. Switch on ON/OFF switch (.32
- 4. Select programme with the highest temperature.32
- 5. Press START button `.32
- 6. After approx. 4 minutes press the START button ` until ‹:‹‚ is indicated on the digital display.32
- 7. Switch off ON/OFF switch (.32
- 8. Turn off the tap, disconnect supply hose and drain water.32
- Drain the appliance according to the following steps:32
- Protection against frostProtection against frost (Emptying the appliance)32
- *9000846969*2
- 9000846969 aus (9212) 640MG2
