Kenmore 11629914901 User Manual

Loading ...

Constantgreen Eighton 1. Dirt passage is dogged t Check for clogs in air passages.

in dirt sensor, 2. Lenses ere dirty 2, Clean lenses,,

No green or red dirt 1o Switch not in CARPET position,, 1, Move swilch to CARPET position

sensor lights, 2, No power to sensor board. 2. Take to your nearest Sears Service

CHECK BAG Indicator

activates,

Vacuum cleaner picks

up moveable rugs -or-

PowerMate pushes too

hard.

Red light for BELT

RESET (overload

protector) is lit on the

PowerMate,

Cord won't rewind°

Vacuum cleaner leaves

marks on carpet,

1,, Full or clogged dust bag

2,, Didy filters

3,, Blocked airflow passage

4_ Certain attachmenI tools

I, Wrong pile height setting

2, Suction too strong

Cen_er,

1, Change bag

2, Change filters

3, Clear blockage from airflow passage

4, This is normal Light should go off

when tool is removed

1, Adjust setting.

2 Select lower Power Level

!, Tripped overload protector in 1. Remove any items thatmay be

PowerMate. caught or jammed, then reset. If

vacuum cleaner starts and stops

again, clean agitator and end caps.

then reset

Io Dirty power cord 1. Clean the power cord

2., Cord jammed 2. Pull out cord and rewind

1., Wrong vacuuming pattern 1, See VACUUMING TIPS

Loading ...

Kenmore 11629914901 vacuum cleaner repair and replacement parts